Main Features

    1. Universal Input 85～265Vac，50/60Hz.

    2..Single, Dual and Triple Output Models .

    3. PCB  installation.

    4. Stable output, low ripple and noise.

    5. Efficiency Up to 88%.

    6. I/O-isolation 2500Vac.

Product Parameter

Note:
1. Output filter capacitors C2, C4, C6 are high-frequency and low-resistance electrolytic capacitors 6 are high-frequency and low-resistance electrolytic capacitors. For the capacity and current flowing, refer to the technical parameters provided by the manufacturer .

The capacitance withstand voltage derating is more than 80%, C1, C3 and C5 to remove high-frequency noise. It is recommended to use high-frequency non polar capacitors with good high-frequency characteristics, with capacity of 1 μ F.
2. The customer's general EMC requirements use the general application circuit of Figure 1, figure 2, figure 3 or figure 4. If there are higher EMC requirements, recommended to use the circuit of Figure 5.The parameters as follows:

    RV is varistor, recommended model: 561kd14, which is used to protect the module from damage during lightning surge.
    R1：1MΩ/2W；
    CY1、CY2、CY3、CY4：1000pF/400VAC；
    Cx1、Cx2：0.22µF/275VAC；
    LG: 10mH-30mH common mode inductance; LC1, LC2: 100Uh-300Uh differential mode inductance. 
3. Fuse: For safety reasons, the input terminal must be connected to the fuse.The recommended specification for wa5p is 1A / 250V, wa10p-wa15p is 2A / 250V, and wa20p-wa40p is 3.15a/250v.